Corner Traps Vs Wall Height

Ro · Post by Ro » Wed Oct 29, 2008 9:26 pm

Look for woolpanels as thick as possible (you can stack'm if ye want to get deeper traps). Just "normal" wool, about 48kg/m3 (what was it again in psf? it's all over the forum...). No barrier attached pref.

There's no strict rule tho... have a look at BOB GOLDS teriffic website. Esp. this one; http://www.bobgolds.com/AbsorptionCoefficients.htm

elektrasoul · Post by **elektrasoul** » Wed Oct 29, 2008 10:01 pm

ok, cheers again mate!

whats PSF, you mean PCF (per cubic foot)?

Ro · Post by Ro » Wed Oct 29, 2008 10:04 pm

elektrasoul wrote:whats PSF, you mean PCF (per cubic foot)?

oops, yes that's what I mean (typo)

elektrasoul · Post by **elektrasoul** » Wed Oct 29, 2008 11:35 pm

hey! this sh!t is confusing me enough without typo's! lol

elektrasoul · Post by **elektrasoul** » Thu Oct 30, 2008 2:52 am

ive just sourced some 75mm thick 60kg/m3 insulation. that should do the job!

ill let yous know how i get on!

Post by **xSpace** » Thu Oct 30, 2008 9:05 am

The r-value on that should be higher then the other stuff you were looking at