Difference GAF Tri Ply & Mineral Surfaced Roof Roll?

corleyd · Post by **corleyd** » Thu Feb 05, 2004 6:42 pm

I can not find a local supply of GAF Tri Ply. I can find Owens Corning Mineral Surfaced Roofing. The stuff I can find is kind of like roof shingles on a roll 3' x 33', 1 lb/cf and is only ~$10 per roll. It is limp mass. It does have the pebble-type coating on one side. Can I use this between layers of drywall? Safe for interior use? Is it different than GAF Tri Ply? It appears to be much less expensive. Does anyone know the difference?

Thanks,
Dennis

corleyd · Post by **corleyd** » Fri Feb 06, 2004 2:55 pm

I have been all over the web, including the GAF Corp website. I can find no recognition by GAF or anywhere else but here about a product called GAF Tri-Ply or TP-4. I can not find a description of what it is to know if what I can find is comparable. Any help?

thanks,
Dennis

knightfly · Post by **knightfly** » Fri Feb 06, 2004 9:12 pm

Hey, Brian Giles - you like this stuff, where'd ya how'd ya why'd ya, etc? Can you clue our man on the stuff? Thanks... Steve

BTW, Corley, I would NOT recommend anything that's petroleum based like roll roofing or building felt for limp mass layers in between wallboard - not worth dying for. You can get just as good results using three different layers of different thickness sheet rock - 1/2 and 5/8 with 3/8 between for one leaf, then 2 layers of 5/8 with 1/2 between, filled with SAFB's or fluffy fiberglas insulation, properly caulked and isolated, and you can't build a door that will keep up with it... Steve

luvshinerbock · Post by **luvshinerbock** » Sat Feb 07, 2004 6:47 pm

TP-4 GAF Tri-Ply rubber roofing roll available at Home Depot here in MPLS, MN...Giles got his at HD in Michigan...seems readily available. Cost me @$38 a roll (39 3/4" wide by 30ft. long)

dean