Firewire. Question

Get your "what mic?" frustration or "have you heard" out here. The language could get real okka in here mate.

Moderators: Aaronw, kendale, John Sayers

kendale
Moderator
Posts: 1667
Joined: Tue Aug 10, 2004 8:10 pm
Location: Hawaii

Post by kendale »

Aloha,

Drill - You can find the M-Audio 410 manual here

So far Sonar 7 PE sounds pretty good. Had to adjust latency a bit, but otherwise no probs.

There's a Free SONAR 7.0.2 Update here

Aloha 8)
Jerry Maguire: Help me... help you. Help me, help you.
tcdyer
Posts: 16
Joined: Mon Mar 24, 2008 5:31 am
Location: Surrey, UK

Post by tcdyer »

Hi,

In reference to your Mic/Line question: It selects between different input levels/impedences (-10/+4dB), so when it is unselected your input is set up for Mic inputs, when you push the switch it changes to a line level input for recording from things like CD players or Samplers. Hopefully that helps with that.

In reference to your 5.1 speaker setup: Currently each of your 3 cables carry 2 audio signals each (therefore 6 channels). What your firewire interface gives you is 6 MONO outputs so you need new cables to connect it. Depending what input your sub/amp has, will tell you what cables you need.

Hope that helps,
Tom
Post Reply