Hi all:
I got a quote from Tecoustics (www.tecoustics.com) in Oakville, Ontario for WIC isolation clips at 15.00$ a piece.
Since I require approximately 35 of these, I was wondering, has anyone had found a cheaper alternative?
-> my design post:
http://www.johnlsayers.com/phpBB2/viewt ... highlight=
Thanks,
frequentseas.
Substitue for Mason Industries WIC clips
Moderators: Aaronw, John Sayers
-
- Posts: 22
- Joined: Mon Feb 19, 2007 11:28 am
- Location: Oakville, Ontario, Canada
- Contact:
Substitue for Mason Industries WIC clips
You and I are mortal, but rock and roll will never die.
-
- Posts: 24
- Joined: Mon Jul 02, 2007 6:53 am
- Location: UpperMidwest, USA
Just wondering if anyone has found a cheaper source for the WIC clips. I've only been able to find them for around $15-$20 a piece or so. I noticed in this thread where someone found them for $9.
I was thinking of using the DC04 clips from PAC instead, which are less expensive, but they don't seem to have specs on capacity etc. when used as a sway brace on their site to make a comparison. Thanks for any help!
Chris
I was thinking of using the DC04 clips from PAC instead, which are less expensive, but they don't seem to have specs on capacity etc. when used as a sway brace on their site to make a comparison. Thanks for any help!
Chris