I've been told that Yamaha NS-10Ms should be positioned to fire straight down the room instead of angled in towards the head at mix position. Is this true?
Appreciate any explanation I could get.
Yamaha NS-10M : Angled vs Straight
Moderator: Aaronw
-
- Posts: 11
- Joined: Fri Dec 22, 2006 6:20 am
- Location: Kuala Lumpur, Malaysia
- Contact:
-
- Moderator
- Posts: 5344
- Joined: Wed Jul 13, 2005 3:55 am
- Location: Panama City Beach, FL USA
- Contact:
-
- Posts: 11
- Joined: Fri Dec 22, 2006 6:20 am
- Location: Kuala Lumpur, Malaysia
- Contact:
-
- Moderator
- Posts: 5344
- Joined: Wed Jul 13, 2005 3:55 am
- Location: Panama City Beach, FL USA
- Contact:
just the usual - don't put them on the console, put the on stands behind the console, minimize use of EQ, keep the volume level low when mixing, make sure the spread on the monitors gives you a good phantom image as compared to a single mono speaker (otherwise you have them too far apart or too close together) etc
Glenn