I am going to try and build a couple of corner bass trap/diffusers based on the John Sayers designs on this site.
Is there are ideal type of wood that would be a best choice to use for the enclosuer and the front slats?
bass trap wood choices?
-
Ronan
- Posts: 11
- Joined: Wed Sep 24, 2003 3:12 am
- Location: Los Angeles
- Contact:
-
knightfly
- Senior Member
- Posts: 6976
- Joined: Sun Mar 16, 2003 11:11 am
- Location: West Coast, USA
The enclosure part is specified in the drawings - 1" MDF - if you can find it, pay extra for MDF that uses no formaldehydes - less outgassing, much healthier.
For the parts that show, it's a matter mostly of personal preference. Main thing is tight, glue and screw construction and choosing dimensions according to the Helmholz calculator on the SAE site... Steve
For the parts that show, it's a matter mostly of personal preference. Main thing is tight, glue and screw construction and choosing dimensions according to the Helmholz calculator on the SAE site... Steve
Soooo, when a Musician dies, do they hear the white noise at the end of the tunnel??!? Hmmmm...