Rubber instead of neoprene?

How thick should my walls be, should I float my floors (and if so, how), why is two leaf mass-air-mass design important, etc.

Moderators: Aaronw, sharward

Post Reply
hugo_inside
Senior Member
Posts: 467
Joined: Wed Nov 03, 2004 3:58 am
Location: Valencia, Spain

Rubber instead of neoprene?

Post by hugo_inside »

I still haven't found neoprene in my country, where do can I buy it? Is rubber a valid material for floor first ply?
Top
Paul Woodlock
Posts: 82
Joined: Tue Oct 07, 2003 1:36 pm
Location: Peterborough UK

Re: Rubber instead of neoprene?

Post by Paul Woodlock »

hugo_inside wrote:I still haven't found neoprene in my country, where do can I buy it? Is rubber a valid material for floor first ply?
Greetings

What country do you live in?

What exactly do you want the elastomer for?


There quite a few elastomer products such as Sylomer, EPDM, EAR products, etc Im sure one of them must be available unless you live in Antartica :)


Paul
Top
hugo_inside
Senior Member
Posts: 467
Joined: Wed Nov 03, 2004 3:58 am
Location: Valencia, Spain

Post by hugo_inside »

I'm from spain, but no factory of this material have no web in spain...

I'll go on looking for it...
Top
Paul Woodlock
Posts: 82
Joined: Tue Oct 07, 2003 1:36 pm
Location: Peterborough UK

Post by Paul Woodlock »

hugo_inside wrote:I'm from spain, but no factory of this material have no web in spain...
As Spain has some manufacturing, there's sure to be a demand for vibration isolation for heavy rotating machinary.
I'll go on looking for it...
Cool!


Paul
Top
Paul Woodlock
Posts: 82
Joined: Tue Oct 07, 2003 1:36 pm
Location: Peterborough UK

Post by Paul Woodlock »

Here ya go.

I just typed Sylomer and Spain into google, and 1ms later....

http://www.amcsa.es/

I couldn't understand a word of it, but I'm sure you will :)

Paul
Top
Post Reply

Return to “Studio Construction”