Hi all,
I just wanted to share a Sketchup model of the 4731 Trunk Rubber that has been found to be a suitable replacement to the GM Type K rubber. I wanted to plan my door seal clearances so I decided to carefully draw this up. It is not perfect, but it is very close.
Send me a DM if you want the .skp file and I will gladly email it.
4731 Trunk Rubber Sketchup Model
Moderators: Aaronw, kendale, John Sayers
-
Elusive Sounds
- Posts: 29
- Joined: Mon Feb 18, 2013 11:09 am
- Location: Moncton, New Brunswick, Canada
-
Gregwor
- Moderator
- Posts: 1501
- Joined: Wed Feb 01, 2017 6:03 pm
- Location: St. Albert, Alberta, Canada
Re: 4731 Trunk Rubber Sketchup Model
Could you make an SKP with JUST that component in it (purge unused in your model before saving), save it as an old SketchUp version and upload it here? There's no reason a small shape like that shouldn't be small enough to post on here. Also, I would suggest saving the component on the 3D Warehouse for the public to use.
That's very kind of you! Thanks so much!
4731 is big hey?!!!!!!
Greg
That's very kind of you! Thanks so much!
4731 is big hey?!!!!!!
Greg
It appears that you've made the mistake most people do. You started building without consulting this forum.
-
Elusive Sounds
- Posts: 29
- Joined: Mon Feb 18, 2013 11:09 am
- Location: Moncton, New Brunswick, Canada
Re: 4731 Trunk Rubber Sketchup Model
Search the 3d Wearhouse for "4731 trunk rubber". You should find it now.
-
John Steel
- Posts: 120
- Joined: Fri Nov 24, 2017 12:07 am
- Location: Hastings, East Sussex, United Kingdom
- Contact: