original Ns 10s (not the studio type)
Moderator: Aaronw
-
- Posts: 12
- Joined: Mon Feb 10, 2003 9:35 am
- Location: UK
- Contact:
original Ns 10s (not the studio type)
Hi I have a pair of original Ns-10s the ones with the removable cloth fronts, not the studio ones.
The original Ns-10s have different tweeters so I was wondering if I could replace the tweeters with the newer studio type?
What is the difference between the two models Is it just the tweeters
________________________________________
you play it we record it and he will make the tea
www.dazwood.co.uk
....sound recording, mixing, audio editing, CDs, studio training....
you play it we record it and he will make the tea
www.dazwood.co.uk
....sound recording, mixing, audio editing, CDs, studio training....
-
- Moderator
- Posts: 554
- Joined: Thu Feb 27, 2003 4:49 am
- Location: Portland Oregon
- Contact:
The short answer in no, you typically can't just throw in a different driver and expect things to work properly. (Sidestepping the debate over whether any NS-10 ever actually worked properly )
However, a retrofit shouldn't be a big deal. This site gives the crossover schematic (plus some modifications) for what I'm pretty sure is the newer version of the NS-10. http://www.dillonacoustics.com/Loudspea ... _XOYA1.htm Check your crossover and see if the tweeter section is the same. If yes, then just pop the newer tweeter in. If no, replace the old crossover component values with those in this schematic and the newer tweeter should work fine. The woofer didn't change, so no modification of that section of the crossover is necessary.
You might also need to modify the cabinet a bit to make the newer tweeter fit, but this is all very doable.
Hope this helps!:)
Thomas
However, a retrofit shouldn't be a big deal. This site gives the crossover schematic (plus some modifications) for what I'm pretty sure is the newer version of the NS-10. http://www.dillonacoustics.com/Loudspea ... _XOYA1.htm Check your crossover and see if the tweeter section is the same. If yes, then just pop the newer tweeter in. If no, replace the old crossover component values with those in this schematic and the newer tweeter should work fine. The woofer didn't change, so no modification of that section of the crossover is necessary.
You might also need to modify the cabinet a bit to make the newer tweeter fit, but this is all very doable.
Hope this helps!:)
Thomas
Thomas Barefoot
Barefoot Sound
Barefoot Sound
-
- Posts: 149
- Joined: Wed Apr 09, 2003 11:44 am
- Location: Dallas,Tx / New Orleans, LA
- Contact:
Barefoot.......? I remember reading(a while back) something about the Ns-10's started or where just a good pair of home bookshelf speakers that become popular. Was this article correct?
Man I really need to design something that I could sell for "3 payments of 19.95" (plus shipping and handling).
Man I really need to design something that I could sell for "3 payments of 19.95" (plus shipping and handling).
Docta'J
http://www.nukmusiccompany.com
http://www.nukmusiccompany.com
-
- Senior Member
- Posts: 311
- Joined: Fri Feb 14, 2003 1:51 am
- Location: Lansing, MI USA
- Contact:
Actually it was supposedly a design that wasn't selling well for Yamaha, so they gave a bunch of them away to executives at record companies. Some enterprising engineers decided that if that is what our songs are going to be listened to we should probably get a pair and and get it to sound good on them and we'll be more successful. Everyone starts seeing them on the meter bridges of the big studio's and starts buying them because the "big boys" use them and I can afford them, thereby (is that a word?) becoming a standard in the industry.
NS-10's really are not a good sounding speaker.
Eric
NS-10's really are not a good sounding speaker.
Eric
"It don't get no better than this"
-
- Site Admin
- Posts: 5462
- Joined: Mon Jan 27, 2003 12:46 pm
- Location: Australia
- Contact:
This is the story as I heard it from guys who were working with Bob Clearmountain at the time. It appears Bob had been asked by a friend to get him a pair of cheap bookshelf speakers for around $300. So during a lunch break Bob went out and found these small Yamaha speakers which sounded OK and were around $300 so he bought them. Getting back to the studio he decided to fire them up to make sure they were OK. he set them up on the console and worked with them for awhile. He ran off a quick mix of what he was doing to take home. When he played the mix in his car, and later at home he was amazed at the truth of the mix transfer - it was still sounding the same as it did back at the studio. The mix compatability was excellent so he bought a pair and started working with them. The rest is history.
That's how they became famous as I understand.
cheers
john
That's how they became famous as I understand.
cheers
john