how to make 9 bass-traps and 11 broadband absorbers in 3days
-
- Posts: 81
- Joined: Sat Jan 22, 2005 8:05 am
- Location: Ljubljana, Slovenia
how to make 9 bass-traps and 11 broadband absorbers in 3days
Hi!
First of all, I'd like to thank John and everyone participating on this forum, sharing the knowladge! It's only because of this forum I finnished my project! You guys are the best!!!!
And another thing... I made the panels in 4 days from the moment the actual construction started... With everything bought and prepared, you could easily complete the first step in one day!
Anyway... to the fun stuff...
1.)
I bought 2m3 of DP-8 (80kg/m3) and 2m3 of DP-5 (50kg/m3), eqivalent to 705 and 703, I was told . And many 400cm long 14,5cm wide and 2cm thick boards, some glue, screws, burlap, etc...
The dimensions I chose are: 1m x 1,8m. That makes for 3 panels of isolation for every panel.
When you have everything you need, cut the boards to your desired leingth. Cut them all at once! The motto of the day is: mass production!
There are many little things you can do in order to make everything a little faster. Let's say, when marking the boards, where you want to cut them, first mark one very precisely, and then just put the next boards next to it, and you have an instant measurment!
For aestetic reasons, I decided to have the 703 absorbers in a 10cm "deep" frame, so I had to cut them "length wise" too.
When you have all the finnished boards prepared, get 4 "corner hoders" (I am sorry, I have no idea how they are called in english. They allow you to fix two boards, 90 degrees to each other, in position).
Put a little glue to where the boards will come together, fixate them in the "corner holder", and scerw them together. Repeat for all the 4 corners. An even faster way is to have a friend hold the boards together instead of fixing them in the "what-are-they-called holders"
First of all, I'd like to thank John and everyone participating on this forum, sharing the knowladge! It's only because of this forum I finnished my project! You guys are the best!!!!
And another thing... I made the panels in 4 days from the moment the actual construction started... With everything bought and prepared, you could easily complete the first step in one day!
Anyway... to the fun stuff...
1.)
I bought 2m3 of DP-8 (80kg/m3) and 2m3 of DP-5 (50kg/m3), eqivalent to 705 and 703, I was told . And many 400cm long 14,5cm wide and 2cm thick boards, some glue, screws, burlap, etc...
The dimensions I chose are: 1m x 1,8m. That makes for 3 panels of isolation for every panel.
When you have everything you need, cut the boards to your desired leingth. Cut them all at once! The motto of the day is: mass production!
There are many little things you can do in order to make everything a little faster. Let's say, when marking the boards, where you want to cut them, first mark one very precisely, and then just put the next boards next to it, and you have an instant measurment!
For aestetic reasons, I decided to have the 703 absorbers in a 10cm "deep" frame, so I had to cut them "length wise" too.
When you have all the finnished boards prepared, get 4 "corner hoders" (I am sorry, I have no idea how they are called in english. They allow you to fix two boards, 90 degrees to each other, in position).
Put a little glue to where the boards will come together, fixate them in the "corner holder", and scerw them together. Repeat for all the 4 corners. An even faster way is to have a friend hold the boards together instead of fixing them in the "what-are-they-called holders"
-
- Posts: 81
- Joined: Sat Jan 22, 2005 8:05 am
- Location: Ljubljana, Slovenia
2.)
Now comes the part where it gets really fast!
I actually "test made" a few panels where I used a stapler to put the burlap on the frames... I also decided to cover the isolation with a layer of... Hm... excuse my english again... Some sort of "papery fabric", used to cover the gardens, so that flowers don't freeze, I would think... Anyway! For me, it was just too frustrating... and slow... and loud... and boring... you get the point.
So here's the fast system!
Lay the pre-made frame on the floor. Gently cover it with a layer of your fabric (in my case one layer of the "papery fabric" over a layer of burlap.) You shouldn't push the fabric into the frame! It should only "rest" on it. By doing so you will get a tight fit arround the isolation, when you push it in...
Now comes the part where it gets really fast!
I actually "test made" a few panels where I used a stapler to put the burlap on the frames... I also decided to cover the isolation with a layer of... Hm... excuse my english again... Some sort of "papery fabric", used to cover the gardens, so that flowers don't freeze, I would think... Anyway! For me, it was just too frustrating... and slow... and loud... and boring... you get the point.
So here's the fast system!
Lay the pre-made frame on the floor. Gently cover it with a layer of your fabric (in my case one layer of the "papery fabric" over a layer of burlap.) You shouldn't push the fabric into the frame! It should only "rest" on it. By doing so you will get a tight fit arround the isolation, when you push it in...
-
- Posts: 81
- Joined: Sat Jan 22, 2005 8:05 am
- Location: Ljubljana, Slovenia
When you have the isolation in place, gently push it in, one panel at a time. If you have normal isolation panels, with no sides "treated" (again can't find the correct word... you can get the isolation with a layer of another, denser material on one side), the fastest way to ensure all of it is covered is to wrap every individual one before pushing it into the frame. I wouldn't bother with covering the front and the back side seperately...
-
- Posts: 81
- Joined: Sat Jan 22, 2005 8:05 am
- Location: Ljubljana, Slovenia
Now the leftovers of wood I got from cutting the boards length-wise are used to hold the fabric in place. I was shocked to discover that we hadn't taken any photos of this part of the process. The best one I have to offer is this one below.
TO explain the situation on this photo... When I was in that "mass production" feeling, I wanted to prepare all the parts the best I could for the final assembly. So... I gluend and screwed 2cmx2cm "stick?", roughly 20cm or so shorter than the actual frame is long or wide. I thought they would be needed to hold the isolation in place, so it couldn't fall out from the back.
But the more important function they have, as I later found out, is that they can also hold the fabric in place while stil providing some support from the back. Sooo... before I could put the isolation into the frames, I had to cut all the "wooden holders" off only to put them back on minutes later...
Just so I will be understood better... The way I fixed the burlap and the "mistery fabric" on to the frame is by sticks, holding it in place the better part of every frame's side. I just screwed the sticks on to the frame, making a wood-fabric-wood sandwich.
TO explain the situation on this photo... When I was in that "mass production" feeling, I wanted to prepare all the parts the best I could for the final assembly. So... I gluend and screwed 2cmx2cm "stick?", roughly 20cm or so shorter than the actual frame is long or wide. I thought they would be needed to hold the isolation in place, so it couldn't fall out from the back.
But the more important function they have, as I later found out, is that they can also hold the fabric in place while stil providing some support from the back. Sooo... before I could put the isolation into the frames, I had to cut all the "wooden holders" off only to put them back on minutes later...
Just so I will be understood better... The way I fixed the burlap and the "mistery fabric" on to the frame is by sticks, holding it in place the better part of every frame's side. I just screwed the sticks on to the frame, making a wood-fabric-wood sandwich.
-
- Posts: 81
- Joined: Sat Jan 22, 2005 8:05 am
- Location: Ljubljana, Slovenia
-
- Site Admin
- Posts: 5462
- Joined: Mon Jan 27, 2003 12:46 pm
- Location: Australia
- Contact:
-
- Posts: 85
- Joined: Wed Sep 20, 2006 10:14 am
- Location: Amsterdam, The Netherlands
-
- Senior Member
- Posts: 2073
- Joined: Sat Mar 29, 2003 12:26 am
- Location: Netherlands
- Contact:
-
- Posts: 1
- Joined: Fri Jun 20, 2008 9:35 am
- Location: ontario,canada
Broad band absorbers
Hey their,
just a quick question about possibly adding to this trap. I have 6 sheets of foam that is 4x6x2" .. "egg shell" would it be a bad idea to place this foam over top of the trap( on the front) ? Please correct me if im wrong, but im pretty sure that the foam is worthless against low frequencies, so i assumed it was worthless on a bass trap.I figured it would help with the mid to high range for recording things such as vocals and acoustic guitars( softer stuff)
thanks
jclarke
just a quick question about possibly adding to this trap. I have 6 sheets of foam that is 4x6x2" .. "egg shell" would it be a bad idea to place this foam over top of the trap( on the front) ? Please correct me if im wrong, but im pretty sure that the foam is worthless against low frequencies, so i assumed it was worthless on a bass trap.I figured it would help with the mid to high range for recording things such as vocals and acoustic guitars( softer stuff)
thanks
jclarke
-
- Senior Member
- Posts: 2073
- Joined: Sat Mar 29, 2003 12:26 am
- Location: Netherlands
- Contact:
Dunno, what traps you're refering to. Those presented in this very thread?
Then, neh, forget about it. The traps don't use any "reflection" surface for higher frequencies so they work more as a broadband with volume for extra basstrapping (more volume is more bass absorbing).
Adding them whimpy egg-crate-styled foam sheets will not make a big difference.
why don't you open up your own threat and post your current panels, if you got any. and ask the Q again... cheers
Then, neh, forget about it. The traps don't use any "reflection" surface for higher frequencies so they work more as a broadband with volume for extra basstrapping (more volume is more bass absorbing).
Adding them whimpy egg-crate-styled foam sheets will not make a big difference.
why don't you open up your own threat and post your current panels, if you got any. and ask the Q again... cheers
-
- Posts: 1
- Joined: Fri Sep 14, 2018 7:28 pm
Re:
Hello!SoulFood wrote:And hereare the panels in action!!!
The sound is just SO MUCH BETTER!!! the first time my [SPAM DELETED] band played in this room, we thought: We totally suck!! And yes... we do. Only that was the first time we really heard it. :S
This is my first time here and I just want to say that I’m very happy to be here and to share my opinion.
Thanks!
-
- Site Admin
- Posts: 11938
- Joined: Thu Aug 21, 2008 10:17 am
- Location: Santiago, Chile
- Contact:
Re: Re:
Goodbye!steveri007 wrote:Hello!SoulFood wrote:And hereare the panels in action!!!
The sound is just SO MUCH BETTER!!! the first time my [SPAM DELETED] band played in this room, we thought: We totally suck!! And yes... we do. Only that was the first time we really heard it. :S
This is my first time here and I just want to say that I’m very happy to be here and to share my opinion.
Thanks!
This was your first and last time here and I just want to say that I’m very happy that you are no longer here and the spam you shared has been deleted along with your opinion.
Thanks!
- Stuart -