Insulation Question, is Rockwool really the only way!!

How thick should my walls be, should I float my floors (and if so, how), why is two leaf mass-air-mass design important, etc.

Moderators: Aaronw, sharward

JohnGardner
Posts: 290
Joined: Tue Jul 13, 2004 11:07 am
Location: Christchurch, New Zealand
Contact:

Insulation Question, is Rockwool really the only way!!

Post by JohnGardner »

We have a glass wool product down under called "Noise Control BlockTM"
It retails at about 50% the price of 75mm rockwool and as you can see in the spec is actually 25mm thicker. It has an "R" rating of 2.3. Would this be OK to use in replace of rockwool in my wall/ceiling cavaties. It would really make a difference to my studios cost.

[u]Noise Control BlockTM[/u]
1140x580mm size sheets
100mm thick
20 peices per bale
13.22 m2 coverage per bale at 100mm thick
2.3 "R" rating

Thanks again

JohnG
z60611
Posts: 251
Joined: Fri Jun 18, 2004 9:08 am
Location: Ontario, Canada

Post by z60611 »

According to
http://www.pinkbatts.co.nz/pdf/3f67c4c33abdb.pdf
Noise Control Block has these Sound Absorption Coefficients:
(thickness 125 250 500 1000 2000 4000 NRC)
100mm 0.50 0.85 1.10 1.10 1.10 1.10 1.04

You can compare that to other Rockwool of 75mm and 100mm shown at
http://www.bobgolds.com/AbsorptionCoefficients.htm

Overall I'd say it's good enough.
Sen
Posts: 277
Joined: Wed Mar 26, 2003 11:07 pm
Location: Melbourne, Australia

Post by Sen »

John,
Is there a link to a distributor of this stuff "down under"...?? thanks
Kind regards
Sen
JohnGardner
Posts: 290
Joined: Tue Jul 13, 2004 11:07 am
Location: Christchurch, New Zealand
Contact:

Post by JohnGardner »

sure,
heres the link:
www.pinkbatts.co.nz
Thanks
JohnG
Post Reply