Hey guys. Anyone looking for 2300 sheets of 3 pound 2" foil faced rigid fiberglass?
There is a listing on ebay right now for exactly that.
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... eName=WDVW
In indiana. Feel free to buy it up and send me 25 sheets as a finders fee.
fucanay
Anyone looking for 2300 sheets of rigid fiberglass!
-
- Posts: 10
- Joined: Fri Jul 16, 2004 1:38 pm
-
- Posts: 96
- Joined: Fri Jul 09, 2004 3:57 am
this made me curious so I poked around and based on the information surmised that it was this JM product.
http://www.jm.com/insulation/building_i ... shield.pdf
If you notice the unfaced product is much better as an absorber than the faced product that they are auctioning.
http://www.jm.com/insulation/building_i ... shield.pdf
If you notice the unfaced product is much better as an absorber than the faced product that they are auctioning.
-
- Posts: 96
- Joined: Fri Jul 09, 2004 3:57 am
Doh! Missed that. Here is the spec sheet thenfucanay wrote:It actually says right on there: "BOARD MANUFACTURED BY KNAUF FIBERGLASS."
But I have no idea what number. I think you can get the foil off fairly easily too.
fucanay
http://www.knauffiberglass.com/index.cf ... tail&ID=12
It would seem that the FSK improves the bass absorbency but decreases the mid and high frequency absorbency. substantially.
As for removing the FSK I wouldn't bet on that being easy. It is glued to the fiberglass so I would think that it couldn't be pulled off with out ripping off the upper levels of fiberglass too.