HUB Studio

Discuss studios designed and built by others.

Moderators: Aaronw, John Sayers

Hub
Posts: 78
Joined: Sat Feb 16, 2013 9:14 pm
Location: Queensland, Australia

Re: HUB Studio

Post by Hub »

This is looking from the live room into the control room through the studio window.

Live Room.jpg
Hub
Posts: 78
Joined: Sat Feb 16, 2013 9:14 pm
Location: Queensland, Australia

Re: HUB Studio

Post by Hub »

This is what we are proposing for the internal treatment of the Control Room. Note that the windows are now covered but can still open.

Bass traps in each rear corner and between at the ceiling corner.
Control room treatment 3.jpg
Hub
Posts: 78
Joined: Sat Feb 16, 2013 9:14 pm
Location: Queensland, Australia

Re: HUB Studio

Post by Hub »

Just working out what pitch to put the cloud at. From the window to the back wall it is about 4600mm long and I have drawn it at a 330mm drop at the front which is about a 4 deg pitch.
Would this be fine?

Cloud angle.jpg
Hub
Posts: 78
Joined: Sat Feb 16, 2013 9:14 pm
Location: Queensland, Australia

Re: HUB Studio

Post by Hub »

Also the diffusion treatment on the back wall is being worked out now. We were thinking of these made out of 16mm MDF and then painted.

Diffusion treatment.jpg
Post Reply