John-
Thanks so much for your site and generosity of knowledge-much appreciated.
I'm preparing to build my project studio and have been admiring your SAE garage studios (both 1 and 2) for some time, but havebeen a little mystified by the ideal scale for these rooms. I was curious if you could slap some dimensions on these plans and repost them?
I'm an architect and could scale and interpolate from the plans, but your approach is much more dimensionally specific then my scaling would be...of course if they were .dwg or .dxf files, I could do it myself.
I hope this isn't presumptuous - I couldn't be more appreciative of your help.
Thanks
jpmanis
Quick question for John
Moderators: Aaronw, kendale, John Sayers
-
- Site Admin
- Posts: 5462
- Joined: Mon Jan 27, 2003 12:46 pm
- Location: Australia
- Contact:
jpmanis - check out Sonar Studios at the Studios Under Construction site at
http://johnlsayers.com/Studio/index.htm
It's a garage style studio construction and there is a pdf. file of the plan.
Otherwise I can make a .dwg of it for you.
cheers
john
http://johnlsayers.com/Studio/index.htm
It's a garage style studio construction and there is a pdf. file of the plan.
Otherwise I can make a .dwg of it for you.
cheers
john
-
- Posts: 26
- Joined: Wed Feb 19, 2003 11:33 am
- Location: SF, CA
-
- Site Admin
- Posts: 5462
- Joined: Mon Jan 27, 2003 12:46 pm
- Location: Australia
- Contact:
I can do a .DXF file of the plan. Try this.
http://johnlsayers.com/Stuff/Detail_Plan_1.dxf
cheers
john
http://johnlsayers.com/Stuff/Detail_Plan_1.dxf
cheers
john
-
- Site Admin
- Posts: 5462
- Joined: Mon Jan 27, 2003 12:46 pm
- Location: Australia
- Contact:
-
- Posts: 26
- Joined: Wed Feb 19, 2003 11:33 am
- Location: SF, CA
-
- Site Admin
- Posts: 5462
- Joined: Mon Jan 27, 2003 12:46 pm
- Location: Australia
- Contact: