4lb, 4" thick, 2'x4' rigid fiberglass for sale

brandondrury · Post by **brandondrury** » Thu Jun 03, 2004 6:12 pm

Hello everyone,

I know how hard this stuff is to get and I also know that you must buy in bulk, so I ordered a truck load of Roxul Rigid Fiberglass. I know that I will not need a truckload.

If anyone needs any, just let me know. I'll soon have specifics as far as prices and shipping go.

It's 4lb density, 4 inches thick, and comes in 2'x4' pieces. I believe each box contains 32 sq ft. We'll have to see for sure when the shipment comes in.

Feel free to email me or reply to this message if you are interested.

Thanks,
Brandon Drury

brandondrury · Post by **brandondrury** » Thu Jun 03, 2004 6:15 pm

I want to make sure that everone knows that this is rockwool. I may have mentioned that it was rigid fiberglass in the first post. This is rockwool.

I'm not sure how it matters. It seams that the two are completely interchangeable. However, I thought it would be right to make sure people knew what I had to offer.

Thanks
Brandon

giles117 · Post by **giles117** » Thu Jun 03, 2004 10:45 pm

Just an exclamation, your dealer made you buy in bulk!!!!!! That bites. The Local dealer here in Ferndale, MI will sell me one bundle and up.

Guest · Post by **Guest** » Fri Jun 04, 2004 4:58 pm

I won't say that he "made me" buy in bulk. I needed quite a bit of the stuff and I did get a better deal for doing so.

I also know that many people have had difficulty finding this product and if I can help out a few fellow studio dudes, then so be it.

Thanks
Brandon

giles117 · Post by **giles117** » Sat Jun 05, 2004 12:29 am

I agree with that. what was your sq ft cost?

Guest · Post by **Guest** » Mon Jun 07, 2004 5:12 am

It cost me $.59 per sq foot in Missouri. A 32 sq ft package was $19.

Brandon

gammon2004 · Post by **gammon2004** » Fri Jun 18, 2004 1:31 am

Hey - how much would you want for 300 sq. ft of the stuff? You can either reply to my email - james@jamesgammonproductions.com , or just give me your contact info and I'll get in touch with you. Thanks!

james

ajcamlet · Post by **ajcamlet** » Thu Sep 16, 2004 12:52 am

did you unload all of that stuff or do you have some left?