Hello everyone,
I've tried to find rockwool in Australia and was just shocked by prices. I'm looking for matts with density 100 kg/m3 and 50 mm and 100 mm thickens. I know only 2 suppliers - Bradford and FM Insulation. The prices are around 100$ per m3!!!!!! I'm not building a royal castel... I just want to build a control room........
Thanks
Rockwool in Australia
Moderators: Aaronw, John Sayers
-
- Moderator
- Posts: 5344
- Joined: Wed Jul 13, 2005 3:55 am
- Location: Panama City Beach, FL USA
- Contact:
Re: Rockwool in Australia
consider using lighter insulation 15kg/m3 for air cavities between walls, slat air cavities, and behind the rigid insulation on corners. then use the rigid 100mm stuff for first reflection points, cloud, and back wall. consider compressing the light insulation where needed.
Glenn
-
- Site Admin
- Posts: 5462
- Joined: Mon Jan 27, 2003 12:46 pm
- Location: Australia
- Contact:
Re: Rockwool in Australia
mate - try Higgins Sound Batt type HSB 3 -
http://www.higginsinsulation.com.au/ind ... &Itemid=57
or Fletchers F132 50mm semi-rigid black faced fibreglass.
http://www.eurekainsulation.com.au/spec ... aSheet.pdf
http://www.higginsinsulation.com.au/ind ... &Itemid=57
or Fletchers F132 50mm semi-rigid black faced fibreglass.
http://www.eurekainsulation.com.au/spec ... aSheet.pdf
-
- Posts: 2
- Joined: Sat Jun 25, 2011 6:55 pm
Re: Rockwool in Australia
Thank you for the information.
Finally I have find some Indonesian rockwool a bit cheaper than australian. It's high density, for bass traps. For general purposes, on the walls I have a choice between fletcher's glasswool batts and some polyester acoustic batts....
http://www.fibreco.com.au/uploads/pdf/F ... ODUCTS.pdf
Hope to get my control room by Christmas
Finally I have find some Indonesian rockwool a bit cheaper than australian. It's high density, for bass traps. For general purposes, on the walls I have a choice between fletcher's glasswool batts and some polyester acoustic batts....
http://www.fibreco.com.au/uploads/pdf/F ... ODUCTS.pdf
Hope to get my control room by Christmas
-
- Site Admin
- Posts: 11938
- Joined: Thu Aug 21, 2008 10:17 am
- Location: Santiago, Chile
- Contact:
Re: Rockwool in Australia
High density? For BASS TRAPS??? Are you SURE about that? How is that going to work? 100 kg/m3 is waaaay too dense for bass trapping, if you ask me.It's high density, for bass traps.
Contrary to popular belief, higher density is WORSE for bass trapping than low density, not better. Bass trapping is usually accomplished with lower density, while high frequency absorption benefits from higher density, but 100 kg/m3 is overboard.
Like Glenn and John said: 15 or 30 kg/m3 is much more like it for bass traps. Maybe even 45 kg/m3, depending on the type of insulation. But if you go much higher than that, then you start losing effectiveness for low frequencies
- Stuart -